Email:sales@unitpcb.comUnion Circuits Co.,Limited

Union Circuits Co.,Limited

Product Categories
Contact Us

Contact: Mr Kenly Lei

Sales Manager
Tel: +86 755 2970 9763

Skype: kenly.lei

Contact: Ms Echo Yang

International Sales

Tel: +86 755 3350 1949 Ext. 810

Contact: Ms Mary Huang
International Sales

Tel: +86 755 3350 1949 Ext. 812
Skype: h-p88888

The Related Characteristics Of Single-sided PCB

    Single panel (Single Boards) on the most basic PCB, the parts are concentrated in one side, the wire is concentrated on the other side (there are SMD components and the wire for the same side, the plug-in device on the other side). Because the wire only appears in one side, so this kind of PCB is called Single-sided Board (Single). Because the single panel in the design line has many stringent restrictions (because only one side, the wiring between the intersection and must be around the path alone), so only the early circuit to use this kind of board.Single-sided PCB
   Features: PCB is more and more widely used, because it has a lot of unique advantages, trichosanthes as follows. can be high-density. For decades, the high density of PCB has been developed with the improvement of integrated circuit integration and installation technology. High reliability. Through a series of inspection, testing and aging tests can ensure that the PCB long-term (use, generally for 20) and reliable work. can be designed. PCB Performance (electrical, physical, chemical, mechanical, etc.) requirements, can be designed through standardization, standardization, etc. to achieve PCB design, short time, high efficiency. Production. The use of modern management, can be standardized, scale (volume), automation and other production, to ensure consistency of product quality. Testability. Set up a relatively complete test methods, testing standards, a variety of testing equipment and instruments to detect and identify the PCB product eligibility and service life. can be assembled. PCB products are not only convenient for a variety of components standardized assembly, and can be automated, large-scale production. At the same time, PCB and various components assembly parts can also be assembled to form larger parts, systems, until the machine. Maintainability„Äā As PCB products and components are assembled in a standardized design and large-scale production, and therefore, these components are also standardized. Therefore, once the system fails, can quickly, easily, flexibly to replace, quickly restore service system work. Of course, you can say more about it. such as the miniaturization of the system, lightweight, high-speed signal transmission and so on.Single-sided PCB
   Production of electronic enthusiasts PCB production methods are mainly thermal transfer method, photosensitive wet PCB production film method, Photosensitive dry film method. The etching agent has environmentally friendly ferric chloride (FeCl3) with rapid hydrochloric acid plus hydrogen peroxide (HCL). Commonly used PCB software has altium designer 10, such as Altium Designer (formerly known as Protel) series of software. Photosensitive Dry Film + Ferric chloride is the best choice for amateurs Single-sided PCB

Copyright © Union Circuits Co.,Limited All Rights Reserved.
QR Code